Are you searching for the best amp for metal? Then you are in the perfect place where you will be guided in choosing the amp that you need.
An ideal amp should provide consistent and powerful tone but with high quality sound. An amp for metal should also have built-in effects to polish the tone.
Amp For Metal Reviews
Fender Frontman is one of the more popular amps today. It provides a heavy overdrive tone, rich with thick bass resonance through its closed-back composition. It is a user-friendly amplifier, which gives you an easy-to-learn combination of knobs.
Marshall MG30CFX emphasizes the distinct Marshall tone through this solid state amplifier. It combines rich tones and built-in digital effects to create widely varied sounds with great quality. In fact, this amp is an all-time favorite among your favorite guitarists.
Orange Crush has the perfect analog tone, enriched with a newly adjusted EQ settings and overdrive button. You will experience total responsiveness and face various tonal options with this amplifier. Many guitarists have a bias towards this amp.
VOX VT40X Modeling Amp
VOX VT40X Modeling Amp has over 11 amp models, 13 board effects and 33 pre-installed programs. Its Virtual Element Technology (VET) provides the most realistic amp sounds and pedal effects. You can play around gear combinations using this amp.
Danelectro Honeytone N-10
Since Danelectro is popular in the effects gear scene, you can expect the same for their amps. In fact, this amp gives a unique clean and overdrive sounds. It also has the essential knobs to create your preferred sound.
Line 6 Micro Spider
Line 6 Micro Spider is another modeling amp that gives you various amp models and effects. It also has a built-in tuner and Pod 2.0 direct output. It is a perfect portable and all-in-one modeling amplifier.
Roland Cube Amplifier
Roland Cube Amplifier gives you freedom over the conventional PA system. It has a dedicated Microphone input along with guitar and auxiliary inputs. In terms of performance, the 6.5” neodymium speakers and slanted cabinet design provides outstanding sound quality.
Sawtooth ST-AMP is a 10W practice amp that gives you a rich variety of tones for a small amplifier. As such, you can experiment on the type of tone you want. Also, it has volume, gain, drive and three-band equalizer knobs.
Pignose 7-100 Portable Amplifier
Pignose 7-100 Portable Amplifier has durable construction through its metal covering and durable 6” speakers. In terms of tonal qualities, it offers a preamp input for distortion pedals and footswitches. It is a good amplifier for your band practice.
Rogue G10 is a 10-watt amplifier with simple composition and limited tonal options. It can be underwhelming for advanced guitar players. However, it is a good choice if you just aim to learn the basics of guitar gears.
How to Select Amp for Metal
When selecting an amp, consider the particular need for it. Figure out whether you will use it in a big area (maybe in a professional studio), or only for simple, home recordings.
If you will use it in a big area, go with an amp that has high wattage. This will provide you with an amp that creates satisfying sounds. From it, you can hear clearly.
On the other hand, an amp with low wattage will do for home recording. In fact, amps that have wattage of around 30 to 50 watts are advisable to buy in such situations.
Power matters when selecting an amp. So, select an amp that can sound as loudly as you prefer. Turn volume controls all the way up to check.
The gain is also an important factor. Of an amp that you are interested in, check the gain by setting the output level to normal. Then, slowly raise the gain to see if it can create a desirable sound.
And, before you take it home, get an amp tested. Have a professional go with you in an amp testing room. There, test an amp for tuning and pick-ups.
How to Use an Amp for Metal
Play around with an amp’s settings first. Check out whether or not it can create your preferred sounds – or sounds that are somewhere close to the required quality.
There is no magical setting that will make your amp sound perfectly. You need to determine the “perfect” sound for yourself. For an easy set-up, you can max the mid, and see if you like it.
Locate an amp’s EQ (or equalizer) settings and tone settings. Focus on these settings because they can make major changes to a recording. Play around with these settings. Then, set them desirably.
If you will use distortion, be mindful of the correct settings. Make sure to set the treble and bass at halfway. One should not have a different setting from the other – even if the difference is relatively small.
Setting the bass and the treble at the same values with no mid is ideal for most amps for metal. While it is always situational, this particular setting is preferable.
Begin with low gain and low overdrive. Then, increase the gain slowly until it feels comfortable. If you think you can achieve a much better sound if you keep increasing the gain, feel free to do so.
How to Maintain Your Amp for Metal
Maintaining an amp’s “mint” condition requires regular check-ups. Using your amp once a month simply for testing will do. If you use it often, this will not be a problem.
If you plan to leave your amp in a storage area for months, remember to take it out monthly. Check its parts, and see whether or not visible defects are present.
Check the cables, wires, and system. Carefully assess whether or not there are cracks or torn cables. If there are, you may have to replace these cables.
Otherwise, switch on the amp. Use it according to your normal activity. Observe any differences – even slight ones. If it produces an unrecognizable sound, take note.
Focus on the unrecognizable sound. Find out the cause. Once you do, have a professional check it out. There might just be a wrong setting. There might also be a problem.
Either way, let the technician inform you of a practical solution. If you need to buy replacement parts, do so. This is a better alternative to throwing out your entire amp.
Frequently Asked Questions About Amps for Metal
Are there amps specifically designed for beginners? Yes, there are. These are referred to as practice amplifiers. These practice amps feature a single speaker and a relatively low voltage.
Is there a big difference between practice amplifiers and amps that you can find in recording studios? Yes, there is. One big difference is the power outputs. Practice amplifiers are okay with 20 watts. Amps in recording studios require at least 30 watts.
What is a unique feature of amps? A unique feature of amps is distortion. Typically, you cannot easily find distortion on keyboards. With distortion, you can create a signature sound.
What is a potentiometer? A potentiometer is a knob. It is the knob that gives you superior control over volume levels. While some have single potentiometers, many amps feature two potentiometers.
What are the main components of an amp? The main components of an amp are speakers, power amp, and pre-amp. These three components are in charge of receiving and taking signals, and then, distributing these signals.
What are the effects that an amp can provide? An amp can provide multiple electronic effects. These effects are compression, distortion, equalization, reverb, and chorus.